Panasonic SC-MAX8000 Operating Instructions Manual page 5

SC-MAX6000 SC-MAX4000
Put the speakers so that the tweeter is on the outside.
Keep your speakers more than 10 mm from the main unit
for ventilation.
SC-MAX6000
Setup 1
█ Stacking the speakers
Stack the speakers with the
supplied speaker stacking pins.
Press down the stacking pins
and the speaker until it is
secured in position.
Stacking pin
Install the supplied bracket as shown below to
secure the speakers.
Tweeter
Screw
Bracket
Setup 2
You can put the speakers in a vertical position as well as
on a shelf.
█ Attaching the speaker feet
Before placing the speakers in a vertical position,
lay the speakers on top of a protection layer and
paste the supplied speaker feet to the bottom of the
speakers.
SC-MAX4000
Note:
• More than one person is required to move, tilt or carry the
speakers.
CAUTION!
• Be careful when babies
or children are near.
• Do not stack the
speakers.
Speaker feet
Protection layer
(not supplied)
Tweeter
5