Preparing The Remote Control - Panasonic SC-MAX8000 Operating Instructions Manual

4
Connect the AC power supply cord.
SC-MAX8000 SC-MAX6000
To household AC outlet
Except for Australia and New Zealand
If the power plug does not fit your socket, use the
supplied power plug adapter.
SC-MAX4000
To household
AC outlet
Do not use an AC power supply cord from other
equipment.
Conserving power
The system consumes a small amount of power even
when it is in standby mode. Disconnect the power
supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Insert the AC power
supply cord up to ,
a point just before the
round hole.

Preparing the remote control

Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
7