SECTION 501-19: Bumpers
REMOVAL AND INSTALLATION
Front Bumper
Special Tool(s)
Heavy-Duty Riveter
501-D011 (D80L-23200-A)
Removal and Installation
All vehicles except Cobra
1. Remove the front bumper cover. For additional information, refer to
section.
Cobra
2. Remove the charge air cooler. For additional information, refer to
All vehicles
3. Remove the two rivets and the front bumper isolator.
Cobra
4. NOTE: The charge air cooler bracket is removed for clarity.
Remove the four bolts and the two intercooler radiator brackets.
All vehicles
5. Remove the bolts and the front bumper.
2003 Mustang Workshop Manual
Front Bumper Cover
Section 303-12
.
in this