Scan A Document With The Mf Toolbox - Canon IMAGECLASS MF4890DW Basic Operation Manual

78
Downloaded from ManualsPrinter.com Manuals
Performing a Scan Using a Shortcut Key
1
Make sure that the computer and the machine is connected (See the
Starter Guide).
2
→
Place documents (
3 ►
Press [ ] (Scan
destination is registered.
When placing your
documents in the feeder
When placing your
documents on the
platen glass
•
When scanning is complete, the folder that contains the scanned images is opened
on the screen of the computer.

Scan a Document with the MF Toolbox

You can specify various scan settings if you select <Remote Scanner> from the operation
panel, and then open the MF Toolbox.
1
Make sure that a computer and the machine are connected properly, and
the MF Toolbox is installed on the computer (See the Starter Guide).
2
Place your documents (
•
Use the platen glass for a higher scan quality.
3
Switch to the Scan mode (
4 ▲
▼
Press [ ] or [ ] to highlight <Remote Scanner>, and then press [OK].
Select the scan type.
Computer
Remote Scanner
5
From your computer, double-click the [Canon MF Toolbox 4.9] icon.
p.19).
►
PC1) or [ ] (Scan PC2) into which the desired
Scanning operation starts.
1. To continuously scan the document, press [
▼
[ ] to highlight <Scan Next Original>, and then
press [OK].
▲ ▼
2. press [ ] or [ ] to highlight <Store and Finish>,
and then press [OK].
Scanning operation starts.
→
p.19).
→
p.16).
▲
] or