54
Downloaded from ManualsPrinter.com Manuals
Specifying the Double-Sided Document Format
(MF4890dw Only)
You can set the document format to scan double-sided documents automatically.
1
Place your documents in the feeder (
2
Switch to the Fax mode (
3
▲
▼
Press [
] or [
] to highlight <2-Sided Original>, and then press [OK].
4
▲
▼
Press [
] or [
] to highlight the desired option, and then press [OK].
<Off >
Read only one side of documents.
•
•
<Book Type>
•
•
<Calendar Type>
5
Send a fax to the desired destination (
Changing the Default Settings
You can change the default settings that is applied when the machine is restarted, [
(Reset) is pressed or the screen is returned to the default screen after auto screen is
performed.
1
Press [
] (Menu).
2
▲
▼
Press [
] or [
] to highlight <Fax TX Settings>, and then press [OK].
3
▲
▼
Press [
] or [
] to highlight <TX Function Settings>, and then press [OK].
4
▲
▼
Press [
] or [
] to highlight <Change Defaults>, and then press [OK].
5
▲
▼
Press [
] or [
] to highlight the desired option, and then press [OK].
<Resolution>
<Density>
<2-Sided Original>
(MF4890dw only)
<Sharpness>
6
Specify the desired setting.
7
After you have specifi ed the setting, press [
<Apply>, and then press [OK].
8
Press [
] (Menu) to close the screen.
→
p.20).
→
p.16).
Read both sides of documents.
Select when the document is
book type.
Read both sides of documents.
Select when the document is
calendar type.
→
p.55).
Make the resolution higher or lower.
Make the density lighter or darker.
Set whether to read one side of documents or both sides of
documents automatically.
Emphasize the outline of the image or decrease the
contrast.
▲
▼
] or [
] to highlight
]