Replacing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the I/O board with the screw holes on the
computer base.
2
Replace the screws that secure the I/O board to the computer base.
3
Connect the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
palm
2
Replace the keyboard.
3
Replace the
optical
4
Replace the
base
5
Replace the battery.
Computer. After working inside your
rest.
drive.
cover.
After Working Inside Your
51