Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 14 7000 Series Service Manual

Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Place the display assembly on the computer base and align the screw
holes on the display assembly with the screw holes on the computer
base.
2 Replace the screws that secure the display assembly to the computer
base.
3 Route the I/O-board cable through the routing guides on the computer
base.
4 Connect the I/O-board cable to the I/O board.
5 Route the antenna cables through the routing guides on the computer
base.
6 Adhere the tape securing the antenna cables to the speaker.
7 Connect the antenna cables to the wireless card.
8 Route the display cable through the routing guides on the computer
base.
9 Connect the display cable to the system board and adhere the tape.

Post-requisites

1 Replace the palm
2 Replace the keyboard.
3 Replace the optical
4 Replace the base
5 Replace the battery.
70
Computer. After working inside your
rest.
drive.
cover.
After Working Inside Your