The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control.
Page 3
To use the Mosaic pedal, enable the effect with the Footswitch (the LED will light when the effect is enabled), turn the LEVEL knob to blend in the desired amount of effect, then adjust the TONE knob to dial-in the amount of high-frequency enhancement to be applied to the effect signal.
USER INTERFACE 1. Power Connector Connect the provided power adapter to this jack. Do not use any power adapter other than the one supplied. 2. Level Knob Adjusts the level of the effect signal. 3. Tone Knob As this knob is raised, the tone becomes brighter and more enhanced. 4.
CONNECTION DIAGRAM HARMAN PS0913DC POWER SUPPLY OTHER PEDALS OPTIONAL Use unbalanced TS instrument cables only. NOTE: The Mosaic should be the first pedal in your effects chain. Placing any effect in front of it may impact its pitch shifting performance.
Need help?
Do you have a question about the mosaic and is the answer not in the manual?
Questions and answers