Recovering Your System - Packard Bell EasyNote TS Quick Start Manual

The Create Factory Default Backup dialog box opens.
This dialog box tells you the number of blank, recordable discs you will
need to complete the recovery discs. Make sure that you have the
required number of identical, blank discs ready before continuing.
3. Insert a blank disc into the drive indicated in the Backup to list, then click
Next. You will be shown the backup progress on the screen.
The drive ejects each disc as it completes burning it.
4. Remove the disc from the drive and mark it with a permanent marker.
Important: Write a unique, descriptive label on each disc, such as
'Windows Recovery Disc 1 of 2' or 'Apps/Drivers Recovery disc'.
Make sure you keep the discs in a safe place that you will
remember.
5. If multiple discs are required, insert a new disc when prompted, then
click OK. Continue until the process is complete.
R
ECOVERING YOUR SYSTEM
If Packard Bell support did not help fix your problem, you can use the
Packard Bell Recovery Management program. This will restore your
computer to the same state as when you purchased it, while giving you an
option to retain all settings and personal data for later retrieval.
Recovery - 13