Recovery; Packard Bell Recovery Management; Creating Recovery Discs - Packard Bell EasyNote TS Quick Start Manual

P B
ACKARD ELL
Note: Packard Bell Recovery Management is only available with a
preinstalled Windows operating system.
If your computer experiences problems that are not recoverable by other
methods, you may need to reinstall the Windows operating system and
factory-loaded software and drivers. To ensure you can recover your
computer when needed, you should create a recovery backup as soon as
possible.

Creating recovery discs

To reinstall using discs, you must create a set of recovery discs
beforehand. Throughout the process, you will be guided by on-screen
instructions. Please read them carefully!
1. Click on Start

Packard Bell Recovery Management.

2. To create recovery discs for the hard drive's entire original contents,
including Windows and all factory-loaded software and drivers, click
Create Factory Default Disc.
- OR -
To create recovery discs for only the factory-loaded software and drivers,
click Create Drivers and Applications Backup Disc.
Important: We recommend that you create each type of recovery
disc as soon as possible.
12 - Quick start guide
R
E C O V E R Y
R M
ECOVERY
> All Programs > Packard Bell, then click on
ANAGEMENT