Intelligent Auto - LG 32SM5B Menu Manual

Master/Slave Mode
Master/Slave Mode : Syncs Multi-Vision products to the time and content of one product. These monitors can
y y
be set to Master or Slave. When multiple monitors are connected by RS-232C, only one monitor should be set
to Master mode for this feature to work properly.
Time Sync : To set Time Sync to On, the current time of the master monitor is sent to multiple slave monitors
y y
connected by RS-232C to sync the time. The monitors are synced every hour after the initial sync when Time
Sync was set to On. (If any change occurs, there is an initial sync, and then the sync continues every hour.)
Contents Sync : To set Content Sync to On, the content of the master monitor is sent to multiple slave monitors
y y
connected by RS-232C to sync content. All monitors must have Content Sync set to On with a single video or
image for this feature to work properly. This feature supports content types only. Schedule types are not sup-
ported.
Content Rotation
Rotates the image clockwise by 90 degrees.
y y
It is recommended that you use content designed to be used in Portrait mode.
y y
To set Content Rotation to On, ARC-related videos are resized to fit the full screen.
y y
Aspect Ratio(Rotation)
Selects an aspect ratio option that will be applied to Content Rotation. (Original/Full)
y y

Intelligent Auto

Adjusts the size, position, and phase of the monitor's screen automatically at the recognized resolution. This
y y
feature is available only in RGB input mode.
White Balance
Adjusts the R-Gain, G-Gain, B-Gain, and Backlight values.
y y
Reset: Resets the White Balance value.
y y
Application
Adds/deletes applications in the Launcher bar.
y y
Factory Reset
You can reset the product to factory settings.
y y
5
Installation Menu