Table of Contents
Advertisement
88
113. Automatic adjustment (Command: j u)
Automatically adjusts image location and shake. (Only be
executed in RGB-PC input mode.)
Transmission
(j)(u)( )(Set ID)( )(Data)(Cr)
Data
01: On
Acknowledgement
(u)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
114. Horizontal location (Command: f q)
Adjust the screen horizontal location. (Only be executed in
RGB-PC input mode.)
* However, the operating range varies depending on the RGB
input resolution.
Transmission
(f)(q)( )(Set ID)( )(Data)(Cr)
Data
00~64: Min -50 (Left) ~ Max 50 (Right)
Acknowledgement
(q)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
115. Vertical location (Command: f r)
Adjust the screen vertical location. (Only be executed in RGB-
PC input mode.)
* However, the operating range varies depending on the RGB
input resolution.
Transmission
(f)(r)( )(Set ID)( )(Data)(Cr)
Data
00~64: Min -50 (Down) ~ Max 50 (Up)
Acknowledgement
(r)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
116. Horizontal Size (Command: f s)
Adjust the screen horizontal Size. (Only be executed in RGB-PC
input mode.)
* However, the operating range varies depending on the RGB
input resolution.
Transmission
(f)(s)( )(Set ID)( )(Data)(Cr)
Data
00~64: Min -50 (Reduce) ~ Max 50 (Enlarge)
Acknowledgement
(s)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
117. Intelligent Auto (Command: t i)
Select Intelligent Auto settings.
Transmission
(t)(i)( )(Set ID)( )(Data)(Cr)
Data
00: Off
01: On
Acknowledgement
(i)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
118. [Genlock] (Command: s n, dc)
Adjusts the Gen Lock On/Off.
Transmission
(s)(n)( )(Set ID)( )(d)(c)( )(Data)(Cr)
Data
00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(d)(c)(Data)(x)
* It may not be supported depending on the model.
Advertisement
Chapters
Table of Contents
