Interface Selection - LG 32SM5B Menu Manual

4
Installation Menu
USB Auto Playback
This is a feature that auto-playbacks photos and videos when a USB device is connected. You can view photos
y y
and videos without manually selecting the View Photos/Movies menu.
If you select Movie for USB Auto Playback, then the video files in the top level folder on the USB device will
y y
automatically play in sequence. When switched on, Signage automatically searches and plays video files from a
USB.
If you select Photo for USB Auto Playback, then the image files in the top level folder on the USB device will
y y
automatically play in sequence. When switched on, Signage automatically searches and plays photos from a
USB. However, this feature is unavailable while the SuperSign contents are played.
Set ID
Set ID (1 ~ 1000) : When several products are connected for display, you can assign a unique Set ID No. to each
y y
product. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately
by using the Set ID you assigned to each product.
Auto Set ID : Automatically assigns a unique set ID number to each set when several products are connected
y y
for display.
Reset Set ID :You can reset the Set ID of the product to 1.
y y
PM Mode
Power Off : Normal DC off status.
y y
Sustain Aspect Ratio : Normal DC off status except that Switching IC stays on.
y y
Screen Off : Automatically changes to Screen Off status when entering the DPM mode, Auto Off (15 mins, 4
y y
hours), or Abnormal Shut Down.
Screen Off Always : Automatically changes to Screen Off status when entering the DPM mode, Auto Off (15
y y
mins, 4 hours), Off Timer, Abnormal Shut Down, or when there is input from the remote control's Power button
or the monitor's Off button.
To change the screen from Off to On status, there must be input from the remote control's Power or Input but-
y y
ton, or the monitor's On button

Interface Selection

You can set communication with the connected OPS.
y y
DISPLAY : Enables communication with external devices via the serial port.
y y
OPS : Enables communication via the OPS connected to the product.
y y
Interface Selection is enabled only when the OPS kit is connected.
y y
OPS Power Control
You can control the power of the OPS.
y y
Disable: Disables the OPS Power Control.
y y
Sync (on) : Synchronizes the power status of the monitor and the OPS only when monitor is on.
y y
Sync (on/off ) : Always synchronizes the power status of the monitor and the OPS.
y y
This feature is enabled after the OPS is connected with the OPS connector and the displays are turned on.
y y
.