55" full hd commercial digital signage (monitor signage) (75 pages)
Summary of Contents for LG 32SM5B
Accessing Installation Menu Accessing Installation Menu Press and hold the SETTINGS button for 5 seconds. MUTE MENU AUTO S.MENU When Toast (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 When the Installation Menu is displayed, select the desired option. - Signage Setup - USB Cloning - Password Change...
Installation Menu Installation Menu NOTE Some features described in the Installation manual may not be supported in certain models. Signage Setup Menu Use this menu to configure the digital signage after installation. Power On Status You can select the operating status of the monitor when the main power is switched on. You can select from among PWR, STD, and LST.
Installation Menu You can configure the DPM (Display Power Management) function. Off: you can set this option to Off, 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min. If this option is not set to Off, the monitor set enters the DPM mode when there is no input signal. If you set this option to Off, the DPM function is disabled.
Installation Menu USB Auto Playback This is a feature that auto-playbacks photos and videos when a USB device is connected. You can view photos and videos without manually selecting the View Photos/Movies menu. If you select Movie for USB Auto Playback, then the video files in the top level folder on the USB device will automatically play in sequence.
Installation Menu Master/Slave Mode Master/Slave Mode : Syncs Multi-Vision products to the time and content of one product. These monitors can be set to Master or Slave. When multiple monitors are connected by RS-232C, only one monitor should be set to Master mode for this feature to work properly.
Installation Menu USB Cloning Menu You can copy the product settings to other sets. Send to USB You can save the current settings in file format to a USB device. Select the file name and press the OK button to complete You cannot save the following items: Advanced Control under PICTURE, Clock, Sleep Time, Power on Delay, Set ID, Tile ID, and items under NETWORK.
Installation Menu Tile Mode Menu You can configure the integrated screen in the same way as each screen is configured. To use this function - Must be used with multiple monitors. - Must be operated after connecting the monitors using DP Cable and distributor. - Tile mode: row x column (r = 1 to 15, c = 1 to 15) - 15 x 15 available Row (1-15)
Installation Menu Tile Mode Tile Mode - Natural mode This monitor can be tiled with additional monitors to When active, the part of the image that would create a large tiled display. normally be displayed in the gap between the monitors is omitted.
Installation Menu Fail Over Menu The input source with the highest priority will be selected. The Auto-Fail Over feature is disabled. Auto The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected. Priority: 1.HDMI, 2.DVI-D, 3.DISPLAYPORT, and 4.OPS, 5.RGB, 6.Internal Memory Manual The input source changes according to the specified order.
Installation Menu ISM Method Menu If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode Selects the desired ISM Method mode. Normal : Disables the ISM method.
Installation Menu Server Menu Set Automatically The monitor set will be set automatically so that the SuperSign server can search it. Server IP This is a menu where you can set an IP address for the SuperSign server. Server Status Server Status displays the status of the connection between your monitor and the SuperSign server.