Digital Audio Input - LG 32SM5B Menu Manual

DPM
You can configure the DPM (Display Power Management) function.
y y
Off: you can set this option to Off, 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
y y
If this option is not set to Off, the monitor set enters the DPM mode when there is no input signal.
y y
If you set this option to Off, the DPM function is disabled.
y y
In the following cases, you can set DPM to Off or 10 min only. If DPM was set to 5 sec, 10 sec, 15 sec, 1 min, or 5
y y
min, it will be changed to 10 min.
- When USB Auto Playback is set to Photo or Movie
- When Fail Over is set to Auto or Manual
Baud rate (9600/115200)
You can change the RS-232 communication speed for controlling your monitor.
y y
You can choose 9600 or 115200.
y y
If you set this option to 9600, the RS-232 communication speed is set at 9600 bps.
y y
If you set this option to 115200, the RS-232 communication speed is set at 115200 bps.
y y
OSD Portrait Mode (Off, On)
You can rotate the OSD clockwise.
y y
You can set this option to On or Off.
y y
If you set this option to Off, the function is deactivated.
y y
If you set this option to On, the OSD rotates 90 degrees clockwise. In this case, you can not use a mouse.
y y
Power On Delay (0 ~ 250)
This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultane-
y y
ously.
You can set the delay interval in the range of 0 to 250 seconds.
y y
Check Screen
The Check Screen feature judges whether there are abnormalities at the edges of the screen. R, G, and B OSDs
y y
are formed on the screen at one second intervals and an RGB Sensor tests the areas.
If set to On, the Check Screen feature is enabled.
y y
If set to Off, the Check Screen feature is disabled.
y y
When the Portrait mode is On, the Check Screen feature is Off and deactivated.
y y

Digital Audio Input

HDMI/OPS/DISPLAYPORT: you can hear the sounds of digital signals carried by HDMI, or OPS or DISPLAYPORT
y y
through the monitor speakers.
Audio In: you can hear sounds through the monitor speaker by connecting HDMI, or OPS or DISPLAYPORT
y y
ports to the Audio In port.
Speaker
If you set this option to On, you can hear sounds through the monitor speaker. (* The monitor speaker is sold
y y
separately.)
If you set this option to Off, you cannot hear sounds through the monitor speaker.
y y
3
Installation Menu