Removing And Installing The Feet - Lenovo ThinkCentre E63z Hardware Maintenance Manual

Figure 12. Installing the frame stand

Removing and installing the feet

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
This section provides instructions on how to remove and install the feet.
To remove and install the feet, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the cover is facing up.
.
Chapter 11 Installing or replacing hardware
103