Olympus Camedia C-360ZOOM Reference Manual page 147

Troubleshooting
The settings are returned to the factory default settings when the camera is turned off.
Possible cause
ALL RESET is set to
ON.
No picture is displayed on the TV when connected to the camera.
Possible cause
The video output
signal is incorrect.
The camera is not in
the playback mode.
The TV video signal
setting is incorrect.
9
146
Corrective action
Select the SETUP tab in the mode menu and set
ALL RESET to OFF.
Corrective action
Set the video output signal according to the
region where used.
Press or close the lens barrier and then
press to switch to the playback mode.
Set the TV to the video input mode.
Ref. Page
P.105
Ref. Page
P.118
P.24, P.85
P.91