PIXEL MAPPING
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait over a minute
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
1
In the shooting mode top menu,
select MODE MENU → SETUP →
PIXEL MAPPING, and press
"How to use the menus" (P.33)
• START is displayed.
2
Press
.
• The BUSY bar is displayed during Pixel
Mapping. When Pixel Mapping is finished,
the screen returns to the mode menu.
• If you accidentally turn the camera off during Pixel Mapping, start again
from step 1.
Note
.
Arrow pad
OK button
6
117