Olympus Camedia C-360ZOOM Reference Manual page 146

The monitor is hard to see.
Possible cause
The brightness is not
adjusted properly.
The monitor is
exposed to direct
sunlight.
Vertical lines appear
on the monitor screen.
Pictures you have taken do not appear on the monitor.
Possible cause
The power is off.
The camera is in the
shooting mode.
There are no pictures
on the card.
There is a problem
with the card.
The camera is
connected to a TV.
The date recorded with the image data is wrong.
Possible cause
The date/time is not
set.
The camera has been
left with the batteries
removed.
Corrective action
Select in the mode menu and then adjust
the brightness.
Block the sunlight with your hand.
Bright light, such as direct sunlight, may cause
vertical lines to appear on the monitor screen.
This is not a malfunction.
Corrective action
Close the lens barrier, and press
monitor on.
Press or close the lens barrier and then
press to switch to the playback mode.
NO PICTURE appears on the monitor. Record
pictures.
Refer to the "Error codes".
The monitor does not function when the AV
cable is connected to the camera.
Corrective action
Set the date/time. The clock adjustment is not
factory-preset.
If the camera is left for about 3 days with the
batteries removed, the date and time setting will
revert to the factory default setting. Set the date/
time again.
Troubleshooting
Ref. Page
P.110
–
–
Ref. Page
to turn the P.24, P.84
P.24, P.85
–
P.142
P.91
Ref. Page
P.29
P.17, P.29
145
9