Installing The Rack-Mounting Kit - Marantz pmd325 User Manual

OTHER FUNCTIONS

Installing the rack-mounting kit

Follow the steps below to install the rack-mounting kit on the
unit.
1.
Remove the four screws on the side panels of the unit.
Screw
2.
Using the four screws which were removed in step 1, attach
the two side panels of the rack-mounting kit as shown in
the figure below.
Side panel (L) of
rack-mounting kit
Downloaded From DvDPlayer-Manual.com Marantz Manuals
44
Screw
Screw
Side panel (R) of
rack-mounting kit
3.
Align the front panel with the boss screws provided in the
side panels of the rack-mounting kit, and fit it in place.
After having attached the front panel, secure it by
tightening up the four box nuts as shown in the figure
below.
Front panel of
rack-mounting kit
4.
The figure below shows how the rack-mounting kit looks
when it has been installed.
Screw
Tips
* When attaching the two side panels of the rack-mounting kit
2
in step , first loosely tighten the four screws, and then while
making adjustments so that the front panel of the rack-
mounting kit and front panel of the main unit are level, tighten
up these four screws securely.
* If necessary, remove the feet on the unit's bottom panel.
Box nut
Boss screw