Dyna-Glo DGW1235BDP-D Manual page 21

OPERATION INSTRUCTIONS
Match Lighting Procedure
Check that both control knobs are turned to the "OFF" O position before beginning match
light procedure.
Warning: Always light your smoker with both doors open.
1. Repeat steps 1 through 5 of the igniter lighting system (PAGE 20).
2. Open both doors. Place a lit match on to the left burner as shown below.
Quickly turn the left control knob to the "HIGH"
turn the control knob "OFF" O, wait at least 5 minutes and for the gas to clear. Repeat the process.
3. Once the left burner is lit, repeat step 2 for the burner on the right.
position. If the burner does not light in 5 seconds,
21