Dyna-Glo DGW1235BDP-D Manual page 11

ASSEMBLY INSTRUCTIONS
5. Insert the cooking grate supports (F) into the
corresponding holes inside the smoker body (G)
starting from the bottom up.
NOTE: There are 8 possible positions to install
the cooking grate according to the need of the user.
6. Attach door latch (J) to smoker body (G) using
two M4x10 screw (BB). Repeat for remaining
door latches (J).
Hardware Used
M4x10mm
BB
Screw
5
6
x6
11
G
F
G
J
BB