Still Pictures; Using A New Card; Lamp Indicators - Olympus ADVANCED MANUAL FE-200 Advanced Manual

Number of storable still pictures and recording length of movies

Still pictures

Image quality
Movie
Image quality

Using a new card

• If you use a non-Olympus card or a card used for another application, such as for
a computer, the message [CARD ERROR] is displayed. To use this card with this
camera, use the [FORMAT] function to format the card.
g"MEMORY FORMAT (FORMAT) Formatting the internal memory/card" (P.25)

Lamp indicators

This camera uses several lamps to indicate the camera status.
Self-timer lamp
Card access lamp
Green lamp of the
monitor
54
EN
Image size
2816 × 2112
SHQ
2816 × 2112
HQ
2048 × 1536
SQ1
640 × 480
SQ2
Image size
320 × 240
HQ
(30 frames/sec.)
160 × 120
SQ
(15 frames/sec.)
Lamp
The lamp lights for approximately 10 seconds, blinks for
approximately 2 seconds, and then the picture is taken.
Lit (red):
Lit (green):
Off:
Blinking (red): A picture is being recorded, the camera is
• Do not do any of the following while the card access lamp is
blinking. Doing so may prevent the image data from being
saved and render the internal memory or card unusable.
Lit: The focus and exposure are locked.
Blinking: focus is not locked
• Release your finger from the shutter button, re-position the AF
target mark on the subject and press the shutter button
halfway again.
Number of storable still pictures
Internal memory
5
15
29
130
Remaining recording time
Internal memory
With
sound
33 sec.
4 min.
5 sec.
Shooting mode and power is on.
Playback mode and power is on.
Power is off.
reading a movie, or images are being
downloaded (when connected to a computer).
• Open the battery/card compartment cover
• Remove the battery.
• Connect or disconnect the AC adapter.
Card (128 MB)
29
86
162
725
Card (128 MB)
Without With
sound sound
3 min.
33 sec.
12 sec.
4 min. 23 min.
29 sec. 14 sec.
Status
Without
sound
3 min.
13 sec.
25 min.
29 sec.