6. Return machine to the upright position.
7. For easy power cord removal, pull and turn cord
hook upward (Figure 4).
8. Plug power cord into a grounded wall outlet
(Figure 5).
Grounded
3 Hole Outlet
Ground Pin
(120V)
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
9. Lower handle to desired operating height by
stepping down on handle release foot lever, seven
height settings (Figure 6).
10. For Dual Speed machines, position dual speed
switch downward for scrubbing/stripping and
upward for spray buffing (Figure 7).
LS-1700/LS-1700HD/TS-1700HD/LS-2000/LS-2000HD/TS-2000HD (01–00)
FIG. 4
Grounded Outlet
Grounding
Edge/hole
(230V/240V)
FIG. 5
FIG. 6
Home
Find... Go To..
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1. Before operating, lift handle so machine is parallel
to floor (Figure 8).
2. To begin scrubbing, depress safety lock button
and pull triggers. Release safety lock button once
machine starts (Figure 9).
ATTENTION: Use caution when starting out.
Machine will jolt when triggers are pulled.
OPERATION
EMC MODEL
FIG. 7
FIG. 8
FIG. 9
5