Advertisement
X
a
3
Renault Master/Nissan Interstar
Combustion air
1
1 Combustion air pipe
Discard section X
Guide wiring harness of metering pump
1
through groove in combustion-air intake
connection piece.
Mount combustion-air intake pipe 1 on
combustion-air intake connection piece and
fasten with hose clamp.
Drill 4 mm dia. hole in frame side member at
position 2. Route combustion-air intake pipe
1 as shown and fasten on frame side member
with p-clamp and self-tapping screw 2.
Mount end cap 3 on combustion-air intake
pipe.
2
31
Note:
When using a Webasto water heater and a
Webasto air heater together, the exhaust pipe
of the water heater must be routed along the
left-hand side sill.
Ensure sufficient spacing between the
exhaust pipe of the water heater and the
combustion-air intake pipe of the air heater.
a = 450 mm
Preparing
combus-
tion air
pipe
i
Installing
intake pipe
15
Advertisement
