Main Functions; Connection And Operation - Sven Pro Operation Manual

Operation Manual
Pro 1000 (USB)
UPS Front Panel
Important! Before the first start-up of the UPS
it is necessary to charge the battery for at least
12 hours without load.

6. MAIN FUNCTIONS

• If there is no electric power supply in the mains,
the UPS is powered with a battery, while the device
connected to the PC produces an audio alarm every
few seconds.
• When the battery is running down, the UPS starts
to produce an audio alarm every 2 seconds.
• When the battery has fully run down, there is a
long audio alarm after which the UPS automatically
switches off.
• When electric power supply restores in the mains,
the UPS automatically switches on. Then the battery
should be charged for at least 12 hours.

7. CONNECTION AND OPERATION

• Place the UPS in an appropriate position with proper
ventilation (free space around the UPS must be not
less than 25 cm).
• Connect the devices to the UPS.
Pro1500 (LCD, USB)
UPS Front Panel with LCD display
a
k
b
c
d
m
l
Pro
Pro 1000 (USB)/
Pro1500 (LCD, USB)
UPS Rear Panel
ENG
e
f
g
h
i
j
d
5