Warranty card – 1 pc. 3. TECHNICAL DESCRIPTION SVEN UP-B600/UP-B800/UP-B1000 models refer to line-interactive uninterrupted power supply units. These UPS include in lead-acid maintenance-free 12 V batteries. When the UPS is in inverter mode, current waveform at the output is the regular sinusoidal wave for power supply computers and monitors.
Uninterruptible Power Supply 4. DESCRIPTION : Battery mode indicator. The indicator turns red and remains steady when the UPS is connected to the battery : Battery charge control indicator. The indicator turns yellow when the UPS is connected to the mains .
UP-600 UP-B800 Operation Manual UP-B1000 7. CONNECTION AND OPERATION Installation and сonnection • Place the UPS in an appropriate position with proper ventilation (free space around the UPS must be not less than 25 cm). • Before the first UPS using, the battery should be charged without load for not less than 12 hours (full charge time may vary depending on the capacity and discharge of the connected battery level).
Notes: • The presented technical specifications are referential and cannot be used as grounds for any claims. • ТМ SVEN products are constantly being improved. On this ground, the technical specifi- cations and completeness can be altered without prior notice.
Page 7
контролем «Свен Скандинавия Лимитед», 48310, Финляндия, Котка, Котолахдентие, 15. Сделано в Китае. UP-B600 Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, № 02- 02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, UP-B800 48310.
Need help?
Do you have a question about the UP-B600 and is the answer not in the manual?
Questions and answers