Timing Of Replacing The Lamp - BenQ MX854UST User Manual

Hide thumbs Also See for MX854UST:
Table of Contents

Advertisement

Timing of replacing the lamp

When the Lamp indicator lights up red or a message appears suggesting it is time to
replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a
malfunction in the projector and in some instances the lamp may explode.
Go to
http://www.benq.com
The Lamp indicator light and Temperature warning light will light up if the lamp becomes too
hot. Turn the projector off and let the projector cool for 45 minutes. If the lamp or Temp
indicator still lights up after turning the power back on, please contact your dealer. See
"Indicators" on page 68
The following lamp warning displays will remind you to change the lamp.
The warning messages below are for reference only. Please follow the actual on-screen
instructions to prepare and replace the lamp.
Status
Install a new lamp for optimal performance. If the
projector is normally run with Economic
selected (See
SmartEco" on page
operate the projector until the next lamp warning
appears.
Press MODE/ENTER to dismiss the message.
It is strongly recommended that you replace the
lamp at this age. The lamp is a consumable item.
The lamp brightness diminishes with use. This is
normal lamp behavior. You can replace the lamp
whenever you notice that the brightness level has
significantly diminished.
Press MODE/ENTER to dismiss the message.
The lamp MUST be replaced before the projector
will operate normally.
Press MODE/ENTER to dismiss the message.
64
Maintenance
for a replacement lamp.
for details.
"Setting Lamp mode as Economic or
62), you may continue to
Message
Notice
Order Replacement Lamp
Equivalent lamp hour > XXXX Hours
Order a new lamp at www.benq.com
OK
Notice
Replace Lamp soon
Equivalent lamp hour > XXXX Hours
Order a new lamp at www.benq.com
OK
Notice
Replace Lamp Now
Equivalent lamp hour > XXXX Hours
Lamp usage time exceeded
Order a new lamp at www.benq.com
OK
Notice
Out of Lamp Usage Time
Replace lamp (Refer to user manual)
Then reset lamp timer
Order a new lamp at www.benq.com
OK

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mw855ustMh856ust

Table of Contents