•
Using the OSD menu
1.
Press MENU/EXIT and then press ◄/► until
Display
the
2.
Press ▼ to highlight 2D Keystone and press
MODE/ENTER. The 2D Keystone page
displays.
3.
Press ▲, ▼, ◄, ► to adjust the keystone
values.
•
Using the QUICK INSTALL key
1.
Press QUICK INSTALL on the remote control.
2.
Press ▼ to highlight 2D Keystone and press
MODE/ENTER. The 2D Keystone page
displays.
3.
Press ▲, ▼, ◄, ► to adjust the keystone
values.
28
Operation
menu is highlighted.