Canon MV550I Instruction Manual page 67

6. If you're in TAPE CAMERA mode:
If you're in TAPE PLAY (VCR) mode:
Operating effects
Sound records/plays back normally.
When operating effects in TAPE CAMERA or CARD CAMERA mode, make
sure the program selector is set to Q.
+
TAPE CAMERA
Select effect
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT |, FADER, EFFECT and MULTI-S appear.
2. Select EFFECT.
• ART, BLK&WHT, SEPIA, MOSAIC settings appear.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
• The menu disappears and the name of your selected setting flashes in the
display.
Effect on/off
5. If you're in TAPE PLAY (VCR) mode, press the
6. Press the ON/OFF button.
• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or
deactivated.
Downloaded From VideoCamera-Manual.com Manuals
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
Fade in- Press the
Fade out- Press the
PLAY
,
+
TAPE
(VCR)
,
+
CARD CAMERA
e (play) button.
a (pause) button.
e
(play) button.
E
67