Canon MV550I Instruction Manual page 66

Digital effects can be set with the controls on the body of the camcorder or the
wireless controller. Pressing the L/M buttons on the wireless controller
E
correspond to turning the selector dial up and down, and pressing the SET button
corresponds to pressing the selector dial in.
DIGITAL DIGITAL
EFFECTS EFFECTS
Operating faders
Sound and image fade together.
When operating faders in TAPE CAMERA mode, make sure the program selector
is set to Q.
+
TAPE CAMERA
Select fader
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT |, FADER, EFFECT and MULTI-S appear.
2. Select FADER.
• FADE-T, WIPE
TAPE PLAY (VCR) mode.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
• The name of your selected fader flashes in the display.
Fader on/off
5. Press the ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the ON/OFF button, the chosen fader is activated
(display lights continuously) or deactivated (display flashes).
66
Downloaded From VideoCamera-Manual.com Manuals
ON/OFF ON/OFF
PLAY
,
+
TAPE
(VCR)
, WIPE
P P
settings appear. M.FADE also appears in
MENU
SET
D.EFFECTS ON/OFF