Energy Save; Using Avc (Auto Volume Control) - Pioneer PDP-LX6090H Operating Instructions Manual

Setting up
Note
• (SRS WOW HD
FOCUS, SRS, SRS TruBass and SRS Definition are on.
• You can adjust the sound effect for listening with headphones.
• The effect of this function differs depending on signals.

Using AVC (Auto Volume Control)

Reduces sudden volume change and compensates source sound
level. To select this option, follow the procedure below.
1 Repeat steps 1 to 3 provided for Sound adjustments.
2 Select "AVC" (/).
3 Select "On" (/).
4 Press HOME MENU to exit the menu.
Note
• To cancel this option, select "Off" in step 3.
Using Sound Control
Select this option when "OPTIMUM" is selected in the "AV
Selection" menu for optimum audio levels adjusted to the picture.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Picture" (/ then ENTER).
4 Select "AV Selection" (/ then ENTER).
5 Select "OPTIMUM" (/ then ENTER).
6 Press RETURN to return to the immediately previous menu.
7 Select "Sound Control" (/ then ENTER).
8 Select "On" (/ then ENTER).
9 Press HOME MENU to exit the menu.
Note
• If "Sound Control" is set to "On" in the "Picture" menu, the
"Sound" menu options are unavailable except "AVC".
• This function is unavailable if any option other than "OPTIMUM"
is selected.
Downloaded From TV-Manual.com Manuals
TM
) denotes a status where SRS
OPTIMUM Performance
Select this option when "OPTIMUM" is selected in the "AV
Selection" menu for optimum picture quality. You can easily
recognize the status of adjustments with an on-screen bar graph
monitor. For selection, follow the procedure below.
1 Repeat steps 1 to 6 provided for Using Sound Control.
2 Select "OPTIMUM Performance" (/ then ENTER).
The on-screen bar graph monitor appears.
Note
• OPTIMUM Performance compares the picture and sound
quality between "Off" (unadjusted) and "On" (adjusted using the
TOOLS button).
• This function is unavailable if any option other than "OPTIMUM"
is selected.
• When "OPTIMUM" is selected, press and hold p to display the
OPTIMUM Performance. Pressing p while displaying Teletext
pages or subtitles does not cause OPTIMUM Performance to
appear.
• To cancel the OPTIMUM Performance, press EXIT.
• The OPTIMUM Performance is unavailable for a PC image.
Power Control
Power Control provides convenient functions for power saving.

Energy Save

You may use one of the three Energy Save modes to save power
consumption.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Power Control" (/ then ENTER).
4 Select "Energy Save" (/ then ENTER).
5 Select "Mode1", "Mode2" or "Off" (/ then ENTER).
Energy Save
Selections Off
Mode1
Mode2
6 Press HOME MENU to exit the menu.
Provides normally bright pictures
Consumes less power than "Off"
mode
Consumes less power than
"Mode1"
08
41
En