Table of Contents
Advertisement
Identify the fuser handle (1) on the top of the fuser unit.
2.
1
2
Pull the two fuser retaining levers (2) towards the front of the
3.
printer so that they are fully upright.
Holding the fuser by its handle (1), lift the fuser straight up
4.
and out of the printer. If the fuser is still warm, place it on a flat
surface which will not be damaged by heat.
Remove the new fuser from its packaging and remove the
5.
transit material.
Holding the new fuser by its handle, make sure that it is the
6.
correct way round. The retaining levers (2) should be fully
upright, and the two locating lugs (3) should be towards you.
2
3
REPLACING CONSUMABLE ITEMS > 67
C
M
Y
K
2
Advertisement
Table of Contents
