Table of Contents
Advertisement
LED
Illumination
OFF
ON
Blinking 1 (2S cycle)
Paper,
Blinking 2 (500mS cycle)
Consumable,
Alarm
(Amber)
Blinking 3 (120mS cycle)
The Status Monitor provides a readable description of the printer
status corresponding to the indications of the LEDs. If you have the
Status Monitor Preferences set to Pop up on alerts, this readable
message will be presented on screen whenever an abnormal
condition occurs.
Status
ON LINE
A warning is indicated (printing
possible)
An error has occurred but printing
can continue if you press the
ON LINE or CANCEL switch.
An error has occurred. You need to
replace consumables or remove
jammed paper, for example. The
printer then recovers from the error
and printing becomes possible
again.
A serious error has occurred.
rebooting or a service call is
required.
INTRODUCTION > 13
Advertisement
Table of Contents
