Step 2: Adjust Azimuth, Elevation And Skew Angle - SELFSAT CAMP38 User Manual

Step 2 : Adjust Azimuth, Elevation and Skew angle
1. Preparation
Select the target satellite (Check the Elevation and Skew angle in manual)
2. Lift the antenna pole
Lift up the antenna pole up to red line to secure
enough adjustable space on the roof.
Do not push up the antenna by holding elevation
control knob and skew control knob.
4. Adjust skew
Turn the skew control knob according to the target
satellite skew angle.
Turn the skew control knob should be limited up
& down to marked red. Over lining causes failure.
6. Fine tuning
6-1. Slightly turn the elevation and skew control knob for fine tuning.
6-2. The level indicates the power of the signal and the color is the signal reception quality from the
chosen satellite. Please find and hold the pole at the position of the best signal.
3. Adjust elevation
85
Turn the elevation control knob according to the
target satellite elevation angle.
5. Adjust azimuth
5-1. Turn the azimuth control pole.
5-2. The signal level and quality is indicated on the
TV screen. Please find and hold the pole at the
position of the best signal.
CAMP38 / CAMP58 User manual - 5