Group Ids And Wildcard Entry; Telephone Interconnect; Status/Message - Motorola MCS 2000 II User Manual

Hide thumbs Also See for MCS 2000 II:
Table of Contents

Advertisement

MCS 2000 Models II & III
Call Alert
See trunking section for more details.

Group IDs and Wildcard Entry

(Conventional Page and Selective Call)
With keypad and unlimited calling, you may enter a
group ID by entering the selective call or call alert fea-
ture and then scroll backward to "group" ID entry with
the mode selector (D).
GROUP
will be displayed. You may then enter a 3-digit group
ID to call or page.
Users can enter a wildcard (
multiple IDs or groups. The '*' matches all ID digits (0-
9) in that position; i.e. to page all radio IDs 0001
through 0009, enter individual ID 0-0-0-*.

Telephone Interconnect

To make a call through the telephone system in the
conventional mode your radio must send access and
hang-up codes to the system. The access code can
be transmitted in either of two ways, depending on
how your radio is programmed.
Immediate: The radio automatically sends a pre-stored
*
) entry to call or page
access code as soon as the telephone intercon-
nect button (7) is pressed.
Delayed: Press the select button (13) or the PTT (F)
and the radio sends the pre-stored access
code.
After the access code is sent, you should get a dial
tone. (If no dial tone sounds, press the HOME button
(3) or the telephone interconnect button (7) to hang
up.) Now press the select button (13) or the PTT (F).
The radio then transmits the number.
The call is then handled as described under "Sending
a Telephone Call" above.

Status/Message

Select the menu STATUS or MESSAGE as previously
described. The last acknowledged status or the first
message will be displayed. Use the mode selector (D)
to scroll through the lists of possible statuses or mes-
sages. When the display shows the desired status or
message, press the select key (13) to transmit the sta-
tus or message. Four beeps will sound to indicate that
the status or message has been received. The radio
will automatically exit the status/message feature. If
the status or message is not received, the radio will
display
page 14
68P81083C49-B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcs 2000 iii

Table of Contents