Data Operation; Radio Care; Safety Information - Motorola MCS 2000 II User Manual

receive is disabled. Refer to the KVL instruction man-
ual for loading procedure.
Note: For some earlier radio models, enter the
keyloading mode by pressing and holding the
secure button (4) until the display changes
showing the secure menu's first item. Scroll to
the "KEYLOAD" choice, and press the select
button. To exit, press the home button.
When the key has been loaded successfully, the radio
will sound one long beep.
To erase a key, press and hold the secure button (4)
until the display changes showing the secure menu's
first item "ERASE KEY", and press the select button.
When key erase is complete, the display will show
"ERASED".
Note: If battery power is removed from the radio for
more than 3 days, the radio may lose its encryption
key.

Data Operation

If your radio is programmed for data operation, you
may send and / or receive data messages from a data
terminal. While sending or receiving data, the radio
will display
MCS 2000 Models II & III
DATA TRANSFER
Any button press will cause the radio to interrupt the
data transfer and return the radio to normal operation.
Please contact the person in charge of your radio sys-
tem for further information.

Radio Care

• Avoid any physical abuse of the radio.
• The radio exterior should be cleaned with a cloth
dampened with clean water, a mild liquid soap
solution or isopropyl alcohol.
CAUTION
The use of chemicals such as detergents,
alcohol (except isopropyl), aerosol sprays,
and petroleum products may be harmful and
damage the radio housing.

Safety Information

Every radio, when transmitting, radiates energy into
the atmosphere which may, under certain conditions,
cause the generation of a spark.
All users of vehicles fitted with radios should be aware
of the following warnings:
DATA TRANSFER
68P81083C49-B
page 17