ATTO Technology FastStream SC 5700 Installation And Operation Manual page 65

TailEventLog
Displays new events to the terminal. Type quit then press
ENTER to exit tail mode.
TailEventLog
Temperature
Displays the current internal operating temperature of this unit
in degrees Celsius.
get Temperature
Time
Controls or displays the current time as clocked by the unit in 24
hour format.
set Time [HH: MM: SS]
get Time
TimeZone
Controls or displays the time zone or an offset from GMT for the
unit.
Default: EST
set TimeZone [[EST | CST | MST | PST] | [+/-HH:MM]]
SaveConfiguration command required
get TimeZone
Username
Specifies the user name. Username is case insensitive, 1 to
32 characters, and cannot contain spaces.
Default: root
set Username [username]
SaveConfiguration command required
get Username
VerboseMode
Controls the level of detail in CLI
response output for the current CLI session.
Default: enabled
set VerboseMode [enabled | disabled]
get VerboseMode
VirtualDriveInfo
Displays characteristics and statistics for all available virtual
drives or any available virtual drive identified by its virtual drive
ID.
VirtualDriveInfo <virtual drive ID>
Voltage
SC 5300, SC 5700
Displays the current voltage levels monitored by the unit.
VDDA = +3.3V
VDDB = +2.5V
VDDC = +1.5V
VDDD = +1.35V
get Voltage [VDDA | VDDB | VDDC | VDDD | all]
WrapEventLog
Controls EventLog output wrapping. When enabled, the unit
logs up to 2048 event entries before overwriting the first entries.
When disabled, the unit stops logging event entries at buffer full.
Default: enabled
set WrapEventLog [enabled | disabled]
SaveConfiguration command required
get WrapEventLog
zModem
Uses the zMODEM protocol to transfer a file to or from the unit
via the RS-232 port. The filename is required if the send option
is specified.
zModem [send [filename] | receive]
Help output and command
xviii