ATTO Technology FastStream SC 5700 Installation And Operation Manual page 25

6 Make any changes.
• Appliance name : The appliance name is a
unique 8-character identifier which is
displayed at the top of each screen. You may
find this useful if you are managing multiple
ATTO devices from a single workstation.
Refer to Manage ATTO Devices,
Configurations on page 37.
• Time and date : use a remote time server to
set the time and time zone, or manually set
the time and date. Refer to Date, Time,
TimeZone and SNTP in
Provides an ASCII-based
• Fibre Channel : change the data rate or the
connection mode for each FC port. Refer to
FCDataRate and FCConnMode in
Appendix A.
Appendix A, CLI
Interface.
• Assign a hard address . Refer to FC Hard
and FCHardAddress in
• Establish Access through FC Ports :
change whether all drives are available to
both ports, creating one node name for both
ports, or if different node names are to be
created for each port.
• Ethernet management port : change
whether or not you use DHCP for an IP
address, subnet mask and gateway, or
manually change these parameters and set a
DNS server address. Refer to
Appendix A.
7 When you have completed your changes, click
on Commit .
Appendix A.
IPDHCP in
20