ATTO Technology FastStream SC 5700 Installation And Operation Manual page 53

Command
SESDiskFailureAlarm (SC 5500, 5700)
SESEnclosures (SC 5500, 5700)
SESIdentify (SC 5500, 5700)
SESIdentifyStop (SC 5500, 5700)
SESMute (SC 5500, 5700)
SESPoll (SC 5500, 5700)
SESStartingSlot (SC 5500, 5700)
SESStatus (SC 5500, 5700)
SNTP
SNTPServer
TailEventLog
Temperature
Time
TimeZone
Username
VerboseMode
VirtualDriveInfo
Voltage (SC 5300, 5700)
WrapEventLog
zModem
CLI command explanations
Command Line Interface commands are listed alphabetically with explanations of what they are used for, their
defaults and syntax.
CAUTION CAUTION
Using CLI without contacting an ATTO technician is not recommended because changing
parameters may cause loss of data and/or disruption to performance and reliability of the
FastStream.
The ExpressNAV Storage Manager is the preferred method to manage the FastStream. Refer to
Interface Options
AutoMap
Automatically assigns a subset of source protocol LUNs to a
subset of target destination devices visible to the unit. The unit
reports a five-second delay while it scans for devices. All
previous maps are deleted.
If FCMultiNode is enabled (multiple node):
AutoMap <fp>
SaveConfiguration command required
If FCMultiNode is disabled (single node): AutoMap
SaveConfiguration command required
192.43.244.18
on page 39 for details.
Default Example
disabled set sesdiskfailurealarm enabled
sesenclosures
set sesidentify RAID g1
sesidentifystop all
mute sesmute remind
60 set sespoll 20
1 set sesstartingslot 2
sesstatus
enabled get sntp
set sntpserver 129.6.15.28
taileventlog
get temperature
set time 03:32:30
EST set timezone pst
root set username Barbara
enabled set verbosemode disabled
virtualdriveinfo
get voltage
enabled set wrapeventlog disabled
zmodem receive
AutoResume
Regulates the AutoResume features for interrupted
initialization, rebuild and erase operations at startup. If no
GroupName is specified, all existing RAID groups are affected.
Default: enabled for AutoResume Initialize, Rebuild
disabled for AutoResumeErase
set AutoResume [Initialize | Rebuild | Erase | All ]
[enabled | disabled] <GroupName>
vi