ATTO Technology FastStream SC 5700 Installation And Operation Manual page 49

Symbol/Abbreviation
GroupName
MemberIndex
mp1
PartitionIndex
CLI error messages
The following error messages may be returned by the Command line Interface:
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR Invalid RAID Group state
ERROR Invalid Block Device index
ERROR Invalid RAID MemberIdx
ERROR Maximum number of RAID Groups exceeded
ERROR Insufficient number of RAID Group members
ERROR
Block Device at specified index no longer available
ERROR Insufficient RAID Group members for RAID type
CLI summary
The following chart summarizes the Command Line Interface commands, their defaults, and an example of how
to enter the commands. Commands which have no default values have a blank entry in that column of the table.
CAUTION CAUTION
Do not use CLI unless you are directed to by an ATTO technician.
Changing parameters may cause loss of data and/or disruption to performance and reliability of
the FastStream.
The ExpressNAV Storage Manager is the preferred method to operate and manage the
FastStream. Refer to
Command
AutoMap
AutoResume
BlockDevClean
BlockDevIdentify
BlockDevIDStop
BlockDevScan
BootDelay
Indicates
The name of the RAID group, designated by the user, to which a block
device is assigned. Use
Index designation of a RAID group member as found by using the
RMStatus command
Ethernet port used to manage the FastStream
Index designation of a partition as found by using the
command
Interface Options
on page 39 for details.
initialization = enabled
rebuild = enabled
erase = disabled
RGDisplay to discover RAID group names
Default Example
automap
set autoresume all disabled
blockdevclean 30
blockdevidentify 30
blockdevidstop
blockdevscan
5 set bootdelay 25
PartitionDisplay
ii