Level 2 Menu Settings - Oki PAGE 14ex User Manual

Level 2 menu settings

Category Item
600
Print Mode Mode
300
Autocont Off
Off
Auto Operation Wait Time 5 sec
90 sec
60 sec
Man Time
30 sec
Darkness
Darkness 0; +1; +2; -2; -1
Control
Power 0 sec
Power Saving
Saving Disable
Low Toner Low Tnr On
Disable
Toner Saving Toner
Light
Clearable
Clr Wrng On
Warnings
Error Report Erreport Off
Speed High
Parrallel I/F
Bi-Dirct Enable
User's Guide
Parameter
V1200 (600 x 1200)
Printing resolution setting in dots per inch (dpi).
The printer can recover from a memory overflow or print overrun automatically after about
On
15 seconds if set to ON, otherwise Recover key has to be pressed.
On Most computer software will send a form feed character at the end of the print job so that
6 sec the last page is ejected. If it does not, the printer can automatically eject the last page after a
300 sec period of inactivity.
Off This setting applies to Adobe PostScript operation only. It determines how long the printer
will wait for a sheet to be inserted in the manual paper feeder.
Adjusts internal settings to compensate for variations in humidity. In environments of high
temperature and humidity if some feint printing occurs, increase setting. In environments of
low temperature and humidity if black or white spots appear, decrease setting.
8 min When this function is active, power to the fuser is turned off to conserve energy. A slightly
longer delay will occur before the next job prints, to allow the fuser to warm up again.
This setting determines whether the printer will remain on-line (ON) or go off-line (OFF)
Off
when the toner cartridge has only enough toner left for about 100 pages.
Medium
Many messages which may appear from time to time can be cleared by pressing the Recover
key if this function is ON. If it is set to JOB, the host computer may be able to clear such
Job
warnings by downloaded commands. This setting is not relevant when using PostScript
emulation.
In PostScript mode this setting determines whether an error report will be printed when an
On
error has occurred.
Most modern PCs can download data at very high speed. If data corruption is experienced
Medium
on printed pages, reduce the setting to MEDIUM.
The printer can send status information back to the computer. A printer interface cable
Disable
compliant with IEEE1284 is needed to use this feature.
Explanation
English
11