Table of Contents
Advertisement
Printer maintenance
Maintenance menu
This menu is used for printer maintenance and setting
some operating functions. To enter the maintenance
menu:
1.
Turn off the printer.
2.
Press and hold MENU 1/Menu 2 and turn the
printer on. USER MNT displays.
3.
Press MENU 1/Menu 2 repeatedly to advance to
the category required.
4.
Press ENTER to start a function. Press
button to see other options, then press ENTER to
select the option required.
5.
Press ON LINE to exit.
The following table gives the different functions of the
maintenance menu:
Function
MENU RESET Reset Level 1 menu to factory settings.
Print a hexadecimal dump of received data for
HEX DUMP
diagnostics. To exit, turn off the printer.
DRUM CNT
Reset the drum counter after replacing the image
RESET
drum cartridge.
24
/Reset
Description
Function
DISABLE = Disables all control panel buttons
OP MENU
except ON LINE.
ENABLE = All buttons are active.
REC BUFF
Auto, 8KB, 20KB, 50KB, 100KB. (Default = Auto.)
Adjust horizontal print position in 0.25 mm
X ADJUST
increments. Plus (+) indicates right movement, minus
(-) indicates left movement.
Adjust vertical print position in 0.25 mm increments.
Y ADJUST
Plus (+) indicated downward movement, minus (-)
indicates upward movement.
2ND TRAY
1...16. (2nd paper tray address. Default = 5.)
Generating a cleaning page
If the printer shows signs of fading, streaking or erratic
marks, the problem may be cleared by generating a
drum cleaning page as follows.
1.
Press the ON-LINE button to take the printer off
line.
2.
Hold down the
together for at least two seconds. The LCD shows
C L E A N I N G a n d M A N UA L A 4 S I Z E
REQUEST.
Description
/Recover and
/Reset buttons
OKIPAGE 14ex, 14i, 14i/n
Advertisement
Table of Contents
