5
Load Paper
!
The printer comes set for standard, 8½" x 11", 20-lb. paper fed from Tray 1. To change the default to
another print media, size or paper source, see "How do I?" in the on-line User's Guide.
Pull the tray out.
Models 24Tn & 24DXn Only: Load the 2nd Paper Tray in the same manner.
6
Open the Top Paper Exit Path.
7
Print the Demo Page.
1 Turn the printer on.
2 Press ON LINE.
8
Check the Settings.
Models Furnished with 2nd Paper
Tray
The printer is set to print from Tray 1. You
can set the printer to automatically switch
to Tray 2 when Tray 1 is empty, or to make
Tray 2 the default. See "How Do I?" in the
on-line User's Guide.
Front Panel Display Language
To change the display language, see "Front
Panel" under Printer Controls in the
on-line User's Guide.
You're now ready to install the software: see Part 2.
4
Adjust the guides (1) and load paper.
Open.
Lift.
3 Hold FORM FEED until PRINT DEMO PAGE appears on the display.
4 Press ENTER, then ON LINE.
Power Save Delay & Quiet Mode Settings
The printer comes with Power Save Delay on.
!
Printer Emulation
The printer automatically switches emulations depending on what
driver it detects when it receives a document. To select a specific
emulation, see "Selecting an Emulation" under Printer Controls in
the on-line User's Guide.
1
!
For the fastest possible time to print, set the Power Save Delay
to Disabled and the Quiet Mode to Off: see "Time to Print"
under Printer Controls in the on-line User's Guide.
Push the tray back in.
Paper Gauge:
Indicates the amount of
paper left in the drawer.
To print envelopes, transparencies,
labels, etc., use the front feeder and
the rear exit path: see "How Do I?"
in the on-line User's Guide for more
information.