Table of Contents
Advertisement
To Install the Windows 95B
(OSR2) Driver
!
Have your original Microsoft Windows 95 CD handy.
You may be prompted for it during the installation.
To determine if you have Windows 95B (OSR2) or
95A (Original 95):
□ Click Start → Settings → Control Panel.
□ Double-click System.
□ On the General tab, look under System. Beneath
"Microsoft Windows 95" a version number appears.
If that number is followed by the letter "B" you have
95B, if not, you have 95A.
To install the Driver:
□ Close any open applications.
□ Make sure that the printer is connected to the PC and
turned on.
□ Restart the computer and wait for the following
window to appear:
□ Wait for the following window to appear:
8
□ Insert the "OKIPAGE 24 Drivers, Utilities and
Publications for Windows 95/98 and NT4.0" CD in
your CD-ROM drive.
□ To load the Windows 95B PCL5e driver, browse to
d:\Win9x\English\Pcl5e (assuming D is your CD-
ROM drive):
1
2
□ Or, to load the Windows 95B Adobe PostScript driver,
browse to d:\Win9x\English\Psdrv (assuming D is
your CD-ROM drive):
Click.
1
2
□ Click OK.
□ Click Finish.
Click.
□ Complete the installation following the instructions on
your screen.
3
4
5
3
4
5
Click.
Advertisement
Table of Contents
