The Temperature Of The Lithium Ion Battery (Esb1) During Charging; Charger Indicator Lamps - Yamaha JWX-1 Owner's Manual

Electric power unit for wheelchairs
Table of Contents

Advertisement

9.5. The Temperature of the Lithium Ion Battery (ESB1)
during Charging
Charge the battery in an environment with a temperature of 10 to 25°C, (50 to 77°F)
To protect the battery, if the internal temperature of the battery is under 0°C (32°F) or over
40°C (104°F), charging does not start. Instead, it enters a standby mode. During this time,
the charge lamp (green) flashes.
While in standby mode, when the battery reaches an appropriate temperature, the charge
lamp will change from a flashing to an "on" state, and charging will start automatically.
(The length of the standby time varies with the conditions.)
The battery temperature increases during charging. However, if the battery temperature
rises above 45°C (113°F) the power for the charger will turn off to protect the battery.
Since charging has not ended, it is necessary to charge again after the battery tempera-
ture has decreased.
Charging a battery immediately after travel, or charging a new battery is likely to cause its
temperature to increase, which increases the likelihood of the charger stopping charging
before completion.
The heat generated during charging will be radiated from the surface of the charger. While
charging, be sure to leave sufficient space around the charger for radiating the heat.

9.6. Charger Indicator Lamps

(1)
Lit green
Indicates normal charging.
The charge lamp will turn off after charging has
completed.
(2)
Flashing green
Charge standby
• When the temperature of the battery is not within the chargeable range (0 to
40°C, 50 to 77°F), the charger enters a standby state and the charge lamp
starts flashing in green.
• While on standby, once the battery temperature falls back within chargeable
range, the charge lamp lights up in steady green and the charger starts charg-
ing automatically. However, if charging is on standby for a long time, the
charging process is aborted. When this happens, the charge lamp flashes rap-
idly in green.
(3) Steady or flashing red
The charger has detected a problem in the charger or the battery, and is unable to charge.
Stop charging by disconnecting the charging plug and the power plug. Check the battery,
charger, cord connection for any problem, and then try charging again.
If the charge lamp lights or flashes in red, an equipment failure may have occurred. Stop
charging by disconnecting the charging plug and the power plug, and have the equip-
ment inspected by a dealer.
9
Charge
Lamp
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents