Adjusting And Confirming The Maximum Speed - Yamaha JWX-1 Owner's Manual

4.3. Adjusting and Confirming the Maximum Speed
With the speed selector switch, you can adjust and confirm the maximum speed.
Move the switch up to increase the speed, and down to decrease it.
Perform the following steps to adjust the maximum speed.
(1) Move the speed selector switch up or
down only once.
The indicator lamp enters a flashing state,
displaying the current maximum speed
in an adjustable state. If adjustment is
not necessary, the display returns after 5
seconds to indicate the battery residual
capacity.
(2) Move the speed selector switch to change
the speed.
While the indicator lamp is flashing, flick up
the speed selector switch once to moves up
the lamp by one level towards faster speed.
Hold the switch up to move the lamp up
continuously towards high-speed.
To decrease the maximum speed, perform
the same steps in reverse direction.
(3) Confirm that the speed display changes
to the battery residual capacity display.
After a 5-second time lapse after changing
the speed, the speed display changes to
battery residual capacity display, complet-
ing the setup.
On
Battery residual
capacity display
(1st speed)
Speeds up
Slows down
Flashing
After 5
second
Speed display
Speed
selector
Switch
Flashing
Speed display
Slow Fast
(5th speed)
Adjustable in 5 steps
On
Battery residual
capacity display
4
41