Canon ip110 series Online Manual page 96

* All lamps are shown lit in the above figure for explanatory purposes.
(8) ON button
Turns the power on or off.
Turning the Printer On and Off
(9) POWER lamp
Lights after flashing when the power is turned on.
Note
• You can check the status of the printer by the POWER and Alarm lamps.
• POWER lamp is off: The power is off.
• POWER lamp lights: The printer is ready to print.
• POWER lamp flashes: The printer is getting ready to print, or printing is in progress.
• Alarm lamp flashes: An error has occurred and the printer is not ready to print.
• POWER lamp flashes and Alarm lamp flashes alternately: An error that requires contacting the
service center may have occurred.
If an Error Occurs
(10) RESUME/CANCEL button
Cancels a print job in progress. Holding this button down lets you select maintenance options or printer
settings.
(11) Alarm lamp
Lights or flashes when an error occurs. When performing printer maintenance or printer settings,
options can be selected according to the number of flashes.
(12) Wi-Fi button
Hold down to automatically set up the wireless LAN connection.
(13) Wi-Fi lamp
Lights or flashes to indicate the wireless LAN status.
Lights:
Wireless LAN connection is enabled.
Flashes:
Printing over wireless LAN. Also flashes while configuring the wireless LAN connection.
Downloaded from ManualsPrinter.com Manuals 96