Checking The Ink Status With The Ink Lamps - Canon ip110 series Online Manual

Checking the Ink Status with the Ink Lamps

1. Make sure that the power is turned on.
2. Open the print head cover.
Replacing Procedure
3. Check the ink lamp.
Close the print head cover after checking the ink lamp status.
Replacing Procedure
• The ink lamp is on.
The ink tank is correctly installed.
• The ink lamp is flashing.
Flashing slowly (at around 3-second intervals)
Ink tank is running low. Prepare a new ink tank.
Flashing fast (at around 1-second intervals)
Ink has run out. Replace it with a new one.
• The ink lamp is off.
The ink tank is not installed properly or the function for detecting the remaining ink level is
disabled. If the ink tank is not firmly in place, press the
clicks into place.
If the ink lamp is still off after reinstalling the ink tank, there has been an error and the printer
cannot print. Check the Alarm lamp on the printer.
If an Error Occurs
Note
• You can also check the ink status on the computer screen.
Checking the Ink Status from Your Computer
Downloaded from ManualsPrinter.com Manuals
...... Repeats
...... Repeats
132
mark on the ink tank until the ink tank