Table of Contents
Advertisement
VIVOTEK
Video orientation: Flip - vertically reflect the display of the live video; Mirror - horizontally reflect the
display of the live video. Select both options if the Network Camera is installed upside-down (e.g.,
on the ceiling) to correct the image orientation. Please note that if you have preset locations, those
locations will be cleared after flip/mirror setting.
Video alignment-
Use the Video alignment tool to line up and fine-tune the positions of images captured by the
camera's 4 sensors. Align these images to form a congruent panoramic view. You can have an
overlap of 3 to 5% of the images to ensure no details is left unnoticed. Select individual images
using the check circles in the middle and use the arrow marks to change the relative positions of
images to match its counterparts.
Day/Night Settings
Switch to B/W in night mode
Select this to enable the Network Camera to automatically switch to Black/White during night
mode.
Turn on built-in IR illuminator in night mode
Select this to turn on the camera's onboard IR illuminator when the camera detects low light
condition and enters the night mode.
User's Manual - 53
Advertisement
Table of Contents
